ДИРЕКЦИЯ: +38(04622) 3-61-65
ОТДЕЛ МАРКЕТИНГА И ВЭД: +38(0462) 95-22-71
E-mail: mail@chezara.com

ANNOUNCEMENTS/NEWS

  • ПАО "ЧЕЗАРА" исполнилось 50 лет. Фоторепортаж

    14 февраля ПАО "ЧЕЗАРА" исполнилось 50 лет.
    more...

  • Общее собрание акционеров ПАТ "ЧЕЗАРА" 2016 года

    Руководство предприятия сообщает, что 15 апреля 2016 года будет проводиться Общее собрание акционеров ПАТ "ЧЕЗАРА"
    more...

  • Создано ООО "Бобровица"

    На базе комбината общественного питания ПАО "ЧЕЗАРА" с 01.10.2015г. создано ООО "Бобровица".

  • Участие в выставке "Зброя та безпека 2015"

    22-25 сентября ПАО "ЧЕЗАРА" приняло участие в выставке "Зброя та безпека 2015"
    more...

  • Общее собрание акционеров ПАТ "ЧЕЗАРА" 2015 года

    Руководство предприятия сообщает, что 23 апреля 2015 года будет проводиться Общее собрание акционеров ПАТ "ЧЕЗАРА"
    more...

  • Напоминание акционерам ПАТ "ЧЕЗАРА" о порядке обслуживания дематериализованных ценных бумаг согласно закона Украины "Про депозитарну систему України"

    Руководство предприятия напоминанет акционерам ПАТ "ЧЕЗАРА" о необходимости учесть пункт 10 Заключительных положений закона Украины "Про депозитарну систему України".
    more...

  • Общее собрание акционеров ПАТ "ЧЕЗАРА" 2014 года

    Руководство предприятия сообщает, что 26 апреля 2014 года будет проводиться Общее собрание акционеров ПАТ "ЧЕЗАРА"
    more...

  • Расширена номенклатура светодиодных светильников уличного освещения

    В модельный ряд светодиодных светильников производства ПАТ "ЧЕЗАРА" добавлены две новые модели - ДБП 20-12 и ДБП 20-36. Детальную информацию о модельном ряде светильников можно получить, скачав PDF каталог светодионой продукции за февраль 2014 года (версия 2)

NEWS ARCHIVE

Product Catalogue for jewellery industry

Discount system for orders over 20,000 UAH

При заказе изготовления позиций, которых нет в наличии – скидка до 10 %

По вопросам приобретения обращаться в Отдел маркетинга и ВЭД (т. +38(0462) 95-24-97)


Design cube 70 with dapping punches on a stand
Уточнить наличие
Price: договорная
Order

406.301.017 Design cube 70 with dapping punches on a stand

Designed for moulding profiles of thin materials of triangular, rectangular, square and circular cross-section of non-ferrous and precious metals products. It is a set of steel rods of triangular, oval, rectangular, circular cross-section and a cube, the faces of which have grooves of spherical, rectangular and triangular shape. Rods and forming block are located in sockets on a wooden stand. Marking of nests corresponds to the forming size of rods.


Design cube 55 with dapping punches on a stand
Уточнить наличие
Price: договорная
Order

406.301.018 Design cube 55 with dapping punches on a stand

Designed for moulding profiles of triangular, rectangular, square and circular cross-section of non-ferrous and precious metal products. It is a set of steel rods of triangular, oval, rectangular, circular cross-section and a cube, the faces of which have grooves of spherical, rectangular and triangular shape. Rods and forming block are located in sockets on a wooden stand. Marking of nests corresponds to the forming size of rods.


Smooth mandrel
Уточнить наличие
Price: договорная
Order

406.701.031 Smooth mandrel

Designed for splitting metal rings with a diameter of 12.5-23 mm. It is a hardened cone-shaped steel rod with the length of 320 mm having smooth conical surface.
Product weight is 0.8 kg.


Smooth square mandrel
Availability at the warehouse:Yes
Price: договорная
Order

406.701.032 Smooth square mandrel

Designed for forming and enlarging square-shaped rings. It is a cone-shaped rod with the length of 227.5 mm with square cross-section (side of the square is 8.5 to 17 mm).
Product weight is 0.75 kg.


Square mandrel "bezel"
Availability at the warehouse:Yes
Price: договорная
Order

406.701.014 Square mandrel "bezel"

Designed for forming square-shaped rings. It is a hand tool in the form of a cone-shaped steel rod with the length of 279.5 mm. Working part – square cross-section cone with the length of 203 mm. Smaller square is 3.2 mm, larger square is 9.5 mm.
It is used in small metal workshops.


Hand rolling
Уточнить наличие
Price: договорная
Order

406.202.001 Hand rolling

Designed for drawing metal, manufacture of semicircular profile tape, rolling rings to the width of 4.5 mm. The rolling is made by mechanical means of quality carbon steel 45. Set of forming rollers (17 pcs.). Rollers have forming grooves of different radii, depth and width. The rolling set includes a plywood stand sized 210x126x18 mm and spare parts kit.
Product weight is 1.0 kg.


Big hand rolling
Уточнить наличие
Price: договорная
Order

406.202.002 Big hand rolling

The design is similar to 406,202,001 but with enlarged dimensions of rack and handle.
Dimensions (mm): 227x128x114.
Product weight is 1.61 kg.


Bullseye vise
Availability at the warehouse:Yes
Price: договорная
Order

406.204.010 Bullseye vise

Designed for fixing different configuration products being engraved. The design of the grip allows fixing a product with an irregular shape.

Vices are composed of the upper and lower hemispheres, two movable jaws, two overlaps and a support. Upper hemisphere with its conical part enters the lower part and can rotate relative to it that is provided by the adjustment screw. Lower hemisphere is mounted on the support on the spherical part of which a gasket of woollen cloth is stuck. On the upper hemisphere deep-profile jaws are installed, on which overlaps with holes are mounted in which the products from accessory kit 406,204,011 are installed.


Working path of jaws, mm0-70
Weight, kg7,8
Dimensions (with stand) mm
-Diameter
-Height

127
170

Bullseye vise set
Уточнить наличие
Price: договорная
Order

406.204.011 Bullseye vise set

Designed for performing jewellery operations coming with bullseye vise. It consists of 34 items of different shape, ideal for installation on bullseye vise jaws. Items are placed on a plywood support.

Weight - 0.5 kg


Universal mould
Уточнить наличие
Price: договорная
Order

406.403.080 Universal mould

Designed for making castings of rectangular shape 45x75x4 mm and cylindrical shape with the diameter of 3.8, 4.8, 5.8 and 6.8 mm and length of 75 mm. It is a metal mould for making rectangular and cylindrical castings of different diameter: 3.8, 4.8, 5.8 and 6.8 mm. It consists of two walls, one of which is movable.


Universal mould
Availability at the warehouse:Yes
Price: договорная
Order

406.403.190, 406.403.242, 406.403.145 Universal mould

It is a metal mould for producing rectangular and cylindrical castings of different diameter. It consists of two walls, one of which is movable.
Применяется:
1. for making cylindrical castings with the diameter 4, 5, 6, 7, 8, 10 mm, and with the length of:

.190.242.145
80 mm110 mm50 mm
2. for rectangular-shaped castings:
.190.242.145
75х80х4,7mm75х110х4,7mm75х50х4mm
Product weight:
.190.242.145
1,9 кг2,42 кг1,45 кг

Vertical engraving machine
Availability at the warehouse:Yes
Price: договорная
Order

406.203.001 Vertical engraving machine

It is intended for use at enterprises of jewellery industry should provide engraving of inscriptions and marks inside the ring of a regular shape and symmetrical longitudinal cross-section (such as a wedding ring or the one with a stone).
Body parts are made of die-cast aluminium alloy. Fixing moving parts and mechanisms of the machine are made mechanically of quality carbon structural steel 10…45.
Parts subjected to a load (pawls, ratchet, tool holder shaft) are made of alloy structure steel 40X.
Gear wheels are made of BrAZh9-4 (БрАЖ9-4).
Keepers fastening engraved ring are made of die casted polyamide PA6-210KS (ПА6-210КС).
Machine design allows reconfiguration and changing the position of inscriptions inside the ring.
Engraving is done manually.
Signs engraving size inside the ring depends on the size of signs of copying disc and when using disk 156.10 will be:
larger – 2-3 mm;
smaller – 1-3 mm.
Factory setting ensures making inscriptions symmetrically with respect to the ends of the engraving ring.
Design allows reconfiguration and changing the position of inscriptions inside the ring relative to its ends.
Engraving is done manually.
Suitable for copying discs Ø127 mm with numbers, printed and handwritten letters.
Product weight is 7.5 kg.


Dapping block cube 50 mm with tool kit and a stand
Уточнить наличие
Price: договорная
Order

406.806.011 Dapping block cube 50 mm with tool kit and a stand

It is intended for making a hemispherical shape products from plastic materials. It is used in small metal workshops. It is a manual tool set of 17 steel rods (90 mm handle length) one end of which is designed as a sphere with the diameter of 2.4 to 34.2 mm; a cube, the faces of which have 17 hemispherical recesses and a stand sized 200x140x36 mm. Rods and the cube are placed in sockets on a wooden stand. Stand nests marking corresponds to the diameter of the hemispheres of rods.
Product weight is 4.2 kg.


Dapping block cube 63 mm with tool kit and a stand
Уточнить наличие
Price: договорная
Order

406.806.021 Dapping block cube 63 mm with tool kit and a stand

It is intended for making hemispherical shape products from plastic materials. It is a tool set of 21 steel rods (90 mm handle length) one end of which is designed as a sphere with the diameter of 1.3 to 50.1 mm, a cube, the faces of which have 21 hemispherical recesses and a stand sized 210x210x36 mm. Rods and the cube are placed in sockets on a wooden stand. Stand nests marking corresponds to the diameter of the hemispheres of rods.
Product weight is 7.2 kg.


Flat dapping block with 27 hemispheres with tool kit and a stand
Уточнить наличие
Price: договорная
Order

406.806.032 Flat dapping block with 27 hemispheres with tool kit and a stand

It is intended for obtaining hemispherical pieces of thin sheet material. It is a manual tool in the form of a plate with 27 hemispheres, a set of rods in the quantity of 22 pieces with the length of 115.2 mm, a stand with 22 round and rectangular slotswith dimensions 132x64 mm. Rods and a plate are placed on a wooden stand sized 278x152x36 mm. Stand nests marking corresponds to the diameter of the hemispheres of rods.
Product weight is 4.5 kg.


Shaped dapping block with tool kit and a stand
Уточнить наличие
Price: договорная
Order

406.806.042 Shaped dapping block with tool kit and a stand

It is intended for making hemispherical and cylindrical shape products from plastic materials. It is a tool set of 14 steel rods, one end of which is designed as a sphere with the diameter of 2.4 to 24.6 mm, a plate at the surface of which there are 14 hemispherical recesses with the diameter of 3.2 to 25.4 mm and 8 semicircular recesses on the faces, a stand sized 200x160x36 mm. Rods and a plate are located on the stand in the nests.
Product weight is 3.2 kg.


Small anvil
Уточнить наличие
Price: договорная
Order

406.702.011 Small anvil

It is designed for performing operations on straightening, riveting and bending. It is an anvil having a flat polished surface, two cone-shaped highs at an angle 23° and three semicircular recesses.
Product weight is 0.6 kg.


Conical stretcher
Availability at the warehouse:Yes
Price: договорная
Order

406.201.001 Conical stretcher

It is used for measuring and enlarging sizes of rings (with the help of a mandrel), and reducing sizes of rings (using plates). It is a tool, the working parts of which are conical mandrel with slots and grading from 1 to 15 by American scale and rotary plate with 16 cone-shaped holes-seating for rings.
Product weight is 11.5 kg.


Graded stretcher
Availability at the warehouse:Yes
Price: договорная
Order

406.201.002 Graded stretcher

It is used for measuring and enlarging sizes of rings (with the help of a graded mandrel), and reducing sizes of rings (using plates). It is a tool, the working parts of which are conical graded mandrel with slots and grading from 1 to 15 by American scale and rotary plate with 16 cone-shaped holes-seating for rings.
Product weight is 11.5 kg.


Compound stretcher
Availability at the warehouse:Yes
Price: договорная
Order

406.201.003 Compound stretcher

It is designed for measuring and enlarging sizes of rings using a conical mandrel; for reducing sizes of rings using a rotary plate and a heel; for bending semicircular, flat and oval pieces.
The stretcher consists of a welded frame, a handle connected with a steel toothed shaft, steel cut conical mandrel with graduated scale from 1 to 15, rotary two-way steel plate with 16 conical holes for rings of different sizes, steel heel, two keepers.
Product weight is 10 kg.


Smooth rolls
Availability at the warehouse:Yes
Price: договорная
Order

406.101.090, 406.101.110, 406.101.130 Smooth rolls

Desktop manual rolls designed for rolling sheet surface.


.090.110.130
Rolls diameter, mm42,55565
Rolls length, mm90110130
Rolled
profile - sheet, mm

4

5

5
Dimensions, mm
-length
-width
-height

401
120
425

427
130
425

453
130
425
Weight, kg13,3619,524,8

Compound rolls
Availability at the warehouse:Yes
Price: договорная
Order

406.102.090, 406.102.110, 406.102.130 Compound rolls

Desktop manual rolls designed for rolling and texturing sheet surface and wire.


.090.110.130
Rolls diameter, mm42,55565
Rolls length, mm90110130
Number of passes for wire5910
Rolled profile:
- sheet, mm
- square, mm
- semi-ellipse with side length, mm

4
1..6,5
2,5..4

5
1..6,5
2,5..4

5
1..6,5
2,5..4
Dimensions, mm
-length
-width
-height
401
120
425
427
130
425
453
130
425
Weight, kg13,319,524,8

Compound rolls
Availability at the warehouse:Yes
Price: договорная
Order

406.102.180 Compound rolls

Desktop manual rolls designed for rolling and texturing sheet surface and wire. The design allows replacement of working rolls.


Rolls diameter, mm65
Rolls length, mm180
Number of passes for wire9
Rolls set max, mm8
Rolled profile:
- sheet
- square
- semi-ellipse
Dimensions (mm)
487х140х381
Weight, kg47,7

Former
Уточнить наличие
Price: договорная
Order

406.302.201 Former

It is designed for bending semicircular, flat and oval pieces.
It consists of a cast iron body, graded steel mandrel with the length of 201 mm, two removable steel keepers for flat, semi-circular or oval material, cast-iron handle with the length of 301 mm.
Product weight is 4.4 kg.


Small punch
Уточнить наличие
Price: договорная
Order

406.303.007 Small punch

It is designed for cutting circles from sheet material and punching holes in sheet material.
It is a structure of a plate and two tempered pullers sized 50x55 mm interconnected by screws and having 7 holes with the diameter of 3.2 to 12.7 mm and punches of the respective diameters.
Product weight is 1.1 kg.


Big punch
Availability at the warehouse:Yes
Price: договорная
Order

406.303.005 Big punch

It is designed for cutting circles from sheet material and punching holes in sheet material.
It is a structure of a plate and a rectangular-shaped puller sized 80x70 mm interconnected by screws and having 5 holes with the diameter of 12.7 to 25.4 mm and punches of the respective diameters.
Product weight is 2.1 kg.


Compound punch
Уточнить наличие
Price: договорная
Order

406.303.011 Compound punch

It is designed for cutting circles from sheet material and punching holes in sheet material.
It is a structure of a plate and a rectangular-shaped puller sized 110x70 mm interconnected by screws and having 11 holes with the diameter of 3.2 to 25.4 mm and punches of the respective to the plate diameters.
Product weight is 2.8 kg.


Set of rods with a stand
Уточнить наличие
Price: договорная
Order

406.807.030 Set of rods with a stand

It is designed for the manufacture of products of wax and other plastic materials.
It is a set of 30 hardened steel rods with the length of handle 90 mm, one end of which is in the form of sphere with the diameter of 2.8 mm to 50.8 mm, a stand sized 200x160x36 mm.
Rods are placed in sockets on a wooden stand. Stand nests marking corresponds to the diameter of the hemispheres of rods.
Product weight is 6.7 kg.


Set of punches with a stand
Уточнить наличие
Price: договорная
Order

406.901.300 Set of punches with a stand

It is designed for the manufacture of circles of plastic materials.
It is a set of 22 hardened steel rods with the length of handle 90 mm, one end of which is in the form of hemispheric recess with the diameter of 2.8 mm to 22.2 mm and a stand sized 170x160x36 mm.
Rods are placed in sockets on a wooden stand.
Stand nests marking corresponds to the diameter of the hemispheres of rods.
Product weight is 3.8 kg.


Tools kit
Уточнить наличие
Price: договорная
Order

406.803.022 Tools kit

It is designed for moulding round-shaped conical rings of flat pieces with a hole.
It is a punch with the length of 137.5 mm and the diameter of 25 mm with conical working surface and the plate sized 140.1x110x30 mm with 20 conical holes with the diameter of 5 mm to 20 mm.
Product weight is 3.1 kg.


Kit: a lever with the set of mandrels and a stand
Уточнить наличие
Price: договорная
Order

406.804.032 Kit: a lever with the set of mandrels and a stand

It is used as a mounting device for mounting workpieces on mandrels.
It is a set consisting of an angled lever with the diameter of 12 mm mounted on a metal base, two sets of tubular mandrels with the length of 50 mm and inner diameter of 12 mm numbered 10 pcs. in each and a wooden stand sized 310x140x18 mm, angular hexagonal wrwnch for clamping the mandrels in a collet mode of the lever.
Product weight is 1.8 kg.


Device for forming rings
Уточнить наличие
Price: договорная
Order

406.202.010 Device for forming rings

It is designed for bending profiles of hemispherical cross-section to form a ring with wall thickness up to 5 mm.
It consists of a rectangular plate sized 140x60x9.6 mm, on which removable stops and a clamp are mounted, driven by a rotary cam. Stops are made with the diameter 12, 14, 16, 20, 22 mm. removable inserts with working part corresponding to the size of stops are installed in the clamp.
Product weight is 2.6 kg.


Guillotine shears 305 мм
Уточнить наличие
Price: договорная
Order

406.208.001 Guillotine shears 305 мм

Table guillotine shears are designed for cutting sheet material with the thickness up to 2 mm. The clamp provides reliable fastening of a workpiece. The precision of the cut is provided by using a measuring ruler and movable stop.
The width of the cut sheet, max (mm) - 320.
The length of the cut sheet, max (mm) - 500.
Overall dimensions (with handle) – 1075x4500x765.
Weight, kg - 40.


Guillotine shears 150 мм
Уточнить наличие
Price: договорная
Order

406.208.002 Guillotine shears 150 мм

Table guillotine shears are designed for cutting sheet material with the thickness up to 2 mm. The clamp provides reliable fastening of a workpiece. The precision of the cut is provided by using a measuring ruler and movable stop.
The width of the cut sheet, max (mm) - 160.
The length of the cut sheet, max (mm) - 500.
Overall dimensions (with handle) – 775x250x750.
Weight, kg – 23.5.


Exhaust hood
Уточнить наличие
Price: договорная
Order

406.209.021 Exhaust hood

It is used in the workshops. It is metal furniture in the form of a desktop cabinet with a vertical partition.


Body of a vertical polishing machine
Availability at the warehouse:Yes
Price: договорная
Order

406.210.050 Body of a vertical polishing machine

It is a protective cover for a desktop polishing machine intended for fixing electric motor with a vertical spindle in it, and directional lighting.
Side flanges Ø75 mm with Ø68 mm hole are used for connecting dust collector hoses.
Recommended electric motor power - 370 watts.
Voltage - 220 V.
Dimensions: LxWxH (mm) – 457x360x507.
Weight (kg) - 9.3.


Body of a one-side polishing machine
Уточнить наличие
Price: договорная
Order

406.210.051 Body of a one-side polishing machine

It is a desktop protective cover for a polishing machine intended for fixing electric motor with a horizontal spindle in it, ventilator for extraction of process waste that collect in the replaceable filter. Places for mounting lighting, switcheers and wires are provided in the body.
Recommended electric motor power - 350 watts.
Dimensions: LxWxH (mm) – 457x305x396.
Weight (kg) - 15.


Body of a two-side polishing machine
Уточнить наличие
Price: договорная
Order

406.210.052 Body of a two-side polishing machine

It is a desktop protective cover for a polishing machine intended for fixing two-side electric motor with horizontal spindles in it, ventilators, replaceable filters, and lamps for lighting the operational area.
Recommended electric motor power - 350 watts.
Dimensions: LxWxH (mm) – 765x305x396.
Weight (kg) – 24.5.


Exhaust hoods
Уточнить наличие
Price: договорная
Order

406.209.041, 406.209.031, 406.209.011 Exhaust hoods

Metal protective covers intended for installation polishing electric motor, ventilators in them. Equipped with special replaceable filters. Places for mounting lamps for lighting the operational area are provided.
Recommended electric motor power - 350 watts.
Dimensions:
LxWxH (mm) - 821х595х275;
- 412х356х275;
- 412х356х275;
Weight (kg) – 17; 6; 6.


Device for cutting plates
Уточнить наличие
Price: договорная
Order

406.205.010 Device for cutting plates

It is intended for fastening rubber with thickness up to 25 mm and width up to 70 mm and its tension for performing cutting.
It consists of a steel plate sized 355x76x10 mm on which sliding rails are fixed allowing producing horizontal movement of gear grabs by screws. Product weight is 3.5 kg.


Set of products for spring cutting and winding
Уточнить наличие
Price: договорная
Order

406.205.020 Set of products for spring cutting and winding

It is used for springs cutting and winding on a ring. Steel cylindrical mandrels (set of 20 pcs.) with the diameter of 2.5 mm to 12 mm and length of 84 mm are used for winding.
Marking of diameters is made on mandrels.
A special clamp and the holder of a disc cutter are used for cutting.
Kit dimensions (with stand):
LxWxH (mm) – 365x220x140.
Weight - 3.5 kg.


Устройство гибочное для трубочек
Уточнить наличие
Price: договорная
Order

406.205.040 Устройство гибочное для трубочек

It is intended for bending round and square tubes of various sizes.
The design allows quick change of bending and forming rollers (by 2 pcs. for circular and 2 pcs. for square tubes).
The set includes a wooden stand sized 240x180x18 mm.
Dimensions (mm): 285x200x173.
Set weight - 7.8 kg


Bracelets cutter
Уточнить наличие
Price: договорная
Order

406.205.030 Bracelets cutter

It is intended for cutting strips up to 30 mm long and 1.5 mm thick.
Dimensions (mm): 150x94x150.
Weight - 4.4 kg


Horizontal engraving machine
Уточнить наличие
Price: договорная
Order

406.203.020 Horizontal engraving machine

It is designed for engraving on flat surfaces of jewellery products. Engraving size depends on the size of signs on bars of font sets. Bars are fixed to a mobile turntable table of the machine.
Engraving is done manually.
Overall dimensions (mm) – 240x360x290.
Weight - 10kg


Accessory kit for a horizontal machine tool
Уточнить наличие
Price: договорная
Order

406.203.021 Accessory kit for a horizontal machine tool

Accessory kit for engraving using a horizontal machine tool 406.203.020


Устройство гибочное для трубочек
Уточнить наличие
Price: договорная
Order

406.205.040 Устройство гибочное для трубочек

Precision tool for cutting, bending sheets, tubes and wires, 62-65 RC.
Available angles 45°, 60°, 90°, 135°, 120°
Dimensions 32 mm x 18 mm.
Made of high quality carbon tool steel.
9 grooves are designed for a wide range of wires and pipes.


Bullseye vise for drilling pearls
Уточнить наличие
Price: договорная
Order

406.206.011 Bullseye vise for drilling pearls

It is designed for drilling holes in pearls, beads and precious stones.
Jaws allow easy installation and reliable fixation of pearls, beads or precious stones.
Bullseye vise desk rotates 180° in order pearl could be drilled on the opposite side without moving the drilling axis.
Water cooling of a pearl is provided during the drilling process.


Переносной вакуумный насос
Уточнить наличие
Price: договорная
Order

406.207.033 Переносной вакуумный насос

Предназначен обеспечения для литья метала под пониженным давлением. Поставляется в комплекте со всеми необходимыми аксессуарами.
Обеспечивает снижение атмосферного давления на 759 мм ртутного столба за 30 сек.


Матрица
Уточнить наличие
Price: договорная
Order

406.802.010 Матрица

Матрица предназначена для формовки полуцилиндрических поверхностей из листового материала. Матрица длиной 160мм, высотой 50мм и шириной 60мм, изготовлена с 5-ю полуцилиндрическими углублениями R17,5мм на глубину 17,5мм; R22,5мм на глубину 22,5мм; R27,5мм на глубину 27,5мм; R42,7мм на глубину 15мм; R64,6мм на глубину 17мм.
Масса изделия 2,4кг.


Матрица двухсторонняя
Уточнить наличие
Price: договорная
Order

406.802.011 Матрица двухсторонняя

Матрица двусторонняя используется для придания полусферической или П-образной формы изделиям из пластичных материалов. Матрица двусторонняя представляет собой прямоугольную стальную закалённую плиту размерами 101,9х50,8х25,4мм, на гранях которой выполнены продольные углубления цилиндрической формы.
Масса изделий 0,72кг.


Стакан с перфорацией
Уточнить наличие
Price: договорная
Order

406.503.318 Стакан с перфорацией

Стакан с перфорацией предназначен для обеспечения более совершенного литья металла под давлением в полости из различных направлений. Применяется в мелких слесарных мастерских.
Стакан представляет собой сварную конструкцию. Входящие детали изготовлены методом гибки листового материала и механической обработки. Это полый цилиндр с толщиной стенки 2мм, высотой Н мм и диаметром Dмм, выполненный из нержа-веющей стали и имеющий "А" отверстий Ø13мм для перфорации, 4 отверстия Ø6мм, расположенных под углом 90° для крепления и кольцом D* толщиной 7мм для фиксации.


Код изделияРазмеры, мм ( " )Диаметр кольца D*, ммКол-во отверстий АWeight, kg
Диаметр D,ммВысота Н,мм
406.503.31885,7 (3 3/8")101,6 ( 4")113300,934
406.503.440101,6 ( 4")101,6 ( 4")133,8300,98
406.503.453101,6 ( 4")146 (5 3/4")133,8401,164
406.503.470101,6 ( 4")177,8 ( 7")133,8501,444
406.503.481101,6 ( 4")215,9 (8 1/2")133,8701,744
406.503.480101,6 ( 4")203,2 ( 8")133,8701,35